Bryant T2-NHP Manual de Instruções descarregar pdf (Página 13)

C operates a cool only

system: outdoor AC unit with an indoor fan coil; no strip

heater support.

Note that this option allows a HP thermostat to be converted to control an AC

system.

Option 03 -- Fahrenheit/Centigrade

Selections:

F = Fahrenheit — Default is Fahrenheit.

C = Centigrade.

Selects temperature measurement units.

Option 0 4 -- Fan (G) ON with W ou tput

Selections:

OF = G not energized with W — This is default.

ON = G energized with W.

This selection determines whether the fan (G) is to be ON or OFF when the W

(furnace or strip heat) is ON. Furnaces and fan coils which manage their own

blowers do not require a separate G signal. Some auxiliary heaters require a

separate G signal to operate the blower when W is applied.

Option 07 -- Zoning

Selections:

OF = non-- zoned system — This is default.

ON = zoned system.

ON disables thermostat’ s internal timers which are not needed with zoning

system controls. Must be set to OF for non--zoned systems.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Sem comentários

Bryant T2-NHP Manual de Instruções Página 13