Bryant T2-NHP Manual de Instruções descarregar pdf (Página 19)

Checklist

1. Run equipment through several heating and cooling cycles to ensure

proper operation. To operate the thermostat in its normal operating mode,

consult the Owner’s Manual.

2. If the equipment is to be left in operation, the setpoints, operating mode,

and possibly program schedule must be properly selected.

3. Put away tools and instruments and clean up debris.

4. Review and leave Owner’s Guide with owner .

FEATURES AND ACCESSORIES

Home, Away, Sleep (programmable models only)

This feature provides three button selections which select from three

predetermined pairs of heat and cool setpoints. In programmed versions, one of

these three choices can be selected for any programmed period. T o change these

settings, a temperature is first selected and then the key pressed and held, similar

to setting stations on a push--button radio. See Owner’s Manual for details.

Clock (programmable models only)

Without batteries the clock will continue to operate for 8 hours while power is

removed. With batteries, the clock operates until the end of the battery life.

Batteries

Battery operation is available for installations where there is no common (C)

wire available at the thermostat or where operation is to continue while the

thermostat is removed from the wall, usually to facilitate remote (armchair)

programming. For battery operation, install two alkaline AA batteries. The

thermostat is designed to operate up to one year on a set of batteries. A battery

indicator on the display warns when battery replacement is needed. See

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

Bryant T2-NHP Manual de Instruções Página 19